How To Change CPU Fan Speed Without Bios – 8 Pro Tips
how to change CPU fan speed without bios: If your computer is getting too hot, you can adjust the fan speed. You might need to increase the fan speed if it’s not overheating but running at full speed for no reason. To do this, you can use the methods shown in this article.
The BIOS on your computer is one of the best ways to change CPU fan speeds, but sometimes it does not work. If you cannot adjust the CPU fan speeds with BIOS, there are other ways to do it without using BIOS.
If you’re having difficulties lowering or increasing the CPU blower speed, one of these methods is likely to work for you.
How to Change CPU Fan Speed Without Bios: Tips and Tricks
Use A Fan Control Software
Fan control software gives you more granular control over your fan speeds. Some good fan control software is SpeedFan and HWMonitor. They both have free and paid versions, but the free versions should be more than enough for most users.
SpeedFan
SpeedFan is a freeware program that allows you to control the speed of your computer fans. It can even reduce the minimum speed of your CPU fan, which is helpful if your CPU is overheating.
Also Read: How to Make Laptop Screen Brighter Than Max
Step 1: Download & Install SpeedFan
Download the latest version of SpeedFan, unzip it, and install it.
Open SpeedFan after installation is complete.
You will see the main screen of the software, which looks like this:
The first thing you need to do is click on ‘Configure fan speeds’ at the top left. Select the fan you want to configure and click Set on the window that pops up.
You will see a percentage next to the ‘Control fan speed’ option. Select this option, then move the slider to determine how fast or slow you want your fans to run. You can also set it by typing in the available field below.
Once you have finished setting the speed, click OK
Step 2: Play With Some Fan Controls
Click on the fan you want to control and adjust its speed by clicking the arrow buttons.
There is another tab named ‘Fan control settings.’
Using this tab, you can choose what action should be taken when your fans reach certain temperatures.
For example, if your CPU reaches 50 degrees Celsius, it might shut down or stop working. You can change these settings in the ‘Fan control settings’ tab.
Step 3: Set Up Your Automatic Fan Control
Click on the ‘Automatic fan speed control’ tab
This tab will allow you to set your fans to run at a certain speed depending on the temperature of your CPU.
For example, you can set your fans to run at full speed when your CPU reaches 60 degrees Celsius and then slow down when it drops below that temperature.
HWMonitor
HWMonitor, on the other hand, has an interface that allows you to monitor various sensors in your computer, including temperatures and fan speeds. You can use it to monitor one or more computers from a central location, but it has a fundamental fan control functionality that lets you turn off or on fans.
Also Read: Why is my laptop battery draining so fast?
Download & Install HWMonitor
Download the latest version of HWMonitor, unzip it, and install it.
Open HWMonitor after installation is complete.
You will see the main screen of the software, which looks like this:
The first thing you need to do is click on ‘Configure.’
Select your fan type and click next on the window that pops up.
In the next window, you will set a manual speed for your fan or use automatic control. If you choose automatic control, you will need to enter the maximum and minimum temperatures you want your lover to run.
Click Finish and then OK.
You can now see the temperature and fan speed of your fan in the main window, as well as a graph of how your fan’s speeds have changed over time.
ZOTAC FireStorm
ZOTAC FireStorm is free software that gives you more control over your graphics card.
It allows you to change clocks, voltages, and fan speeds. It also has a monitoring tab that lets you see your graphics card’s temperature, voltage, and fan speed.
Also Read: How to use lightning headphones on a laptop
Download & Install ZOTAC FireStorm
Go to the ZOTAC FireStorm download page and grab a copy of the software. The free version should be sufficient for most users.
Start the software after it is installed on your computer. You will see this screen:
Click on ‘Fan Control’ at the top right corner of the screen, then enable ‘Manual fan control’ if it is not already helped.
You can now use the slider to change the fan speed of your graphics card. You can also set it by typing in the available field below, just like you did with SpeedFan.
Once you have finished setting the speed, click OK.
Also Read: How To Reset Acer Laptop Without Password?
NoteBook FanControl
NoteBook FanControl is a freeware program that lets you control the fan speeds of your pc.
It also has a monitoring tab that will let you see your computer’s temperature, voltage, and fan speed.
Download & Install Notebook FanControl
Go to the Notebook FanControl download page and grab a copy of the software. The free version should be sufficient for most users.
Start the software after it is installed on your computer. You will see this screen:
Click on ‘Adjust fan speed’ at the bottom left corner of the screen, then increase or decrease the fan speed as needed by using the slider or typing in a value in the field.
Click OK to confirm your changes.
Once you have finished changing the settings, click on ‘Apply now’ at the screen’s bottom-left corner. This will save your changes, and your computer will now use the new fan speeds.
FAQs
1. How do I change the fan speed on my computer?
There are three ways to do this: you can use the BIOS, HWMonitor, or ZOTAC FireStorm.
2. What is the BIOS?
The BIOS (Basic Input/Output System) is a set of instructions stored on a chip on your motherboard. It controls how your computer starts up and how it communicates with other devices.
3. What is HWMonitor?
HWMonitor is a software program that lets you monitor your computer’s temperature, voltage, and fan speeds.
4. What is ZOTAC FireStorm?
ZOTAC FireStorm is free software that gives you more control over your graphics card. It allows you to change clocks, voltages, and fan speeds.
5. How do I change my CPU fan speed manually?
If the BIOS does not let you change your CPU fan speed, you can download HWMonitor. Your computer will restart when you are finished using HWMonitor. Open up HWMonitor and click on ‘Configure.’ On the window that pops up, select your fan type and click next. In the next window, enter a manual speed or use automatic control. Click Finish and then OK.
6. How do I increase the fan speed on my computer?
You can use Notebook FanControl to increase your fan speed. Start the software after it is installed on your computer and click on ‘Adjust fan speed.’ Increase or decrease the fan speed as needed by using the slider or typing in a value in the field. Click OK to confirm your changes, then click on ‘Apply now’ at the screen’s bottom-left corner. Your computer will now use those fan speeds
7. Can you adjust CPU fan speed?
You can adjust CPU fan speeds using the BIOS or software like HWMonitor and ZOTAC FireStorm.
conclusion
Thanks for reading! We hope this article has helped you understand how to change your CPU fan speed. Please feel free to ask in the comments section below if you have any questions.
